Using Data Compression Technology
The main objective of an engineer troubleshooting a power quality event is to identify the source of the disturbance in order to determine the required corrective action. To identify the source, the engineer depends on recorded data captured by monitoring equipment.
The management demands a cost effective method to solve the problem as quick as possible. The electrical engineer speaks of installing instrumentation, collecting data, analyzing data, re-installing and re-analyzing. It is not uncommon for months to pass until the problem is isolated and a solution is implemented.
Power quality analysis has traditionally posed a unique challenge to the engineer, demanding an accurate assumption as to the dimensions of the disturbance in order to capture the event to memory for examination.
The correct balance between memory size and the deviation of the disturbance from the norm is often elusive. Thresholds set too low capture too many events of little or no consequence, filling the memory before the sought after damaging event occurs. Setting the threshold too high can overshoot the event.